20x 3 LED RGB 5050 SMD Injection Module Strip sign shop front 6000MCD DC12V IP65
20x 3 LED RGB 5050 SMD Injection Module Strip sign shop front 6000MCD DC12V IP65
- Extensively applied in Backlighting for signage letters, concealed lighting and advertisement sign lightingEasy to install and operation.
- Applicable for automobile decoration, contour lighting or border
- Light up colorful home life ,DIY household lights for hallways, stairs, trails ,windows.
- Light up colorful life hotels decoration use,Theaters, clubs, shopping malls, festivals and performances
- Architectural decorative lighting,Archway, canopy and bridge edge lighting, Security lighting and Emergency
|
Voltage(V) |
DC 12 |
Material of shell |
Iron |
|
Current（mA） |
60 |
Color of the shell |
Milk-white |
|
Power（W） |
0.72 |
Connecting cables |
UL1007 20# |
|
Emitting angle |
120° |
Connecting cable |
Positive: yellow; single: green; Negative: white; |
|
Luminous (lm) |
-------- |
Cascade Qty(pcs) |
20 |
|
Dimension(mm) |
85*18*7 |
Fix screw |
--------- |
|
LED Qty(pcs) |
3 |
Back glue |
EVA sponge tape |
|
Emitting color |
Full color |
Operating temp. |
-40~60℃ |
|
IC mode |
WS2811 256 |
IP rate |
IP 65 |
|
Warranty |
1 years |
IP type |
Epoxy resin |
Parameters of light source：
|
Type of led |
RGB SMD 5050 |
||
|
Emitting angle |
120° |
||
|
Life span |
>30000H |
||
|
Emitting color |
Colorful |
||
|
VF |
Red：1.9-2.2V blue/green：3.0-3.3V |
||
|
CT/WL of led |
red |
blue |
green |
|
620-625 nm |
460-465 nm |
520-525 nm |
|
|
Luminous flux/ brightness |
red |
blue |
green |
|
700 mcd |
500 mcd |
1500 mcd |
|
Remarks of installation and application:
- Don`t stick the surface of the light by sharp tools.
- Don`t fix this product by sour glass glue or other soured adhesion; don’t operate or store this product in sour environment or the light will be vulcanized and the life span of the product will be reduced.
- Drive this product by 12V DC switch power supply, and the power should be suitable for the quantity of the led modules; do not connect this product to the utility directly, or the product will be burnt up.
- The total power of the led modules in series should be lower than 80% of the power of the driver, or the power supply will be burnt up probably, select the suitable thickness of the connecting cable according to the quantity of modules, and the connecting points should be wrapped by electrical tape.
- The maximum cascade quantity of this product is 20 pieces for one strip, and the brightness of the two ends will be different because of the voltage loss when you increase the quantity of the module.
Package Includes:
- 20pcs LED 5050 3-leds SMD Module